Took some time off work today, and headed off to the range. Had an old hard drive that I wanted to take a few shots at with the old 308. Oh yea, like butter.
Really good video on how to buy an NFA item (mainly supressors)
Some longer distance stuff today
I had the good fortune not to work today, so I stopped off, loaded up the nearest Russian, and went out for a relaxing day on the range.
Set my rifle steel up at 200 yards (300 yards was underwater and I wasn’t willing to swim out to the berm). When asked if I was preparing for a war, I replied that I was working to ensure I never need to become a vegan.
As seen in a store in Alaska…
Why don’t we have these in Florida??!?!
Smith & Wesson Mag S&W M&P 22 Long Rifle 12 Round SS
These have been out of stock for a long time, and I’ve seen them going for criminal prices on gunbroker.
Look like Midway finally got the 12 round models IN STOCK!
$99.99 for 1600 rounds CCI/Speer Mini-Mag Ammo Can, .22 LR, 40 Gr, Gilded Lead Round Nose
Originally submitted at Gander Mountain
For practice, plinking, or target shooting, it's hard to beat the reliability and practicality of CCI ammunition. These rounds are loaded using top-notch components and powders to deliver consistent accuracy. High-volume shooters will appreciate the blend of performance and affordability. 1600 …
This stuff makes any gun work better
By Reloader-Rob.Com from Lake Mary, Fl on 8/5/2012
Best Uses: Shooting Ranges, Outdoors
Describe Yourself: Enthusiast
Was this a gift?: No
I use almost nothing but this, of my many 22 pistols, this round feeds and fires in EVERY one of them.
(legalese)
Found these back in stock, so I got one.
Saw this when it was announced, and it went out of stock pretty fast. Got a notification they were back and I jumped on it.
Rainier Arms Raptor™ Ambidextrous Charging Handle by AXTS
This may be the final attempt at make at an aftermarket charging handle. I’ve used several, but THIS just might be the one, so far it looks and works fantastic.
Xs-Products Drum Magazine Challenge Entry # 002c
Xs-Products Video Challenge, $2000 Top Prize
Xs-Products Video Challenge, $2000 Top Prize
By XS Products on May 25, 2012 at 11:19 AM in Featured Firearm Articles
Xs-Products Video Challenge!!!
Prizes:
1st Place: $2000
2nd Place: $1000
3rd Place: $500
Runner up first 20 contestants: 100 rounds of free ammunition
How to enter: First Contact James Malarkey at Xs-Products via email at james@xs-products.com to get your entry number. Once you get your entry number, you are officially entered into the contest.
Rules: The video entrant must create a video using an Xs-Product fifty round drum magazine. The video must be over 10 seconds long and must be uploaded to, YouTube and the title must start with Xs-Products Drum Magazine Challenge, followed by the user’s entry number. Once your video is uploaded contact james@xs-products.com with a link to your video it will be posted to the www.xs-products.com website. Videos must be uploaded by August 15th in order to qualify.
September 30th all entrants’ scores will be assessed. This will be based on a weighted average between the amounts of views and likes the entrant received on their video. 50% of the score is based on views, and 50% will be based on likes, dislikes will not be counted.
Example: Xs-Products Drum Magazine Challenge entrant 001X has 15,000 views and 50 likes; their score is 15,000/50. Entrant Number 002X has 14,000 views and 100 likes; their score is 14,000/100. If the highest score in the contest is 15,000 views and 50 likes, those will be the basis for which all views will be weighed. 15,000 would therefore be a 100% of 50 points, and 100 views would be 100% of 50 points. Entrant number 001X would have a score of 50/25 (total score: 75) and entrant 002X would have a score of 47/50 (total score 97). Entrant 002X would win the competition. (Note) rounding was used to simplify the score.
Scores and entrants will be tallied and the winners will be announced October 5th via facebook and www.xs-products.com .
May the best man or woman win!
-Team Xs-Products
So here is my pathetic entry….
https://youtube.com/watch?v=HmF9Oww9_Ss
Shooting today. Testing out a new gun
Shut up and take my money!
I had occasion to be in the city of Deland on the fourth of July this year for some things, and decided that while I was here, I should at least take a drive by Tactical Machining’s place of business. Not expecting to find them operating on an American holiday, I rolled up to find the doors wide open with people hard at work. I got out of the car and walked up, expecting to be chased off, but was instead met by a friendly group of guys. They were busily operating CNC machines that were producing – what else – AR15 lowers and uppers. It was like being a kid in a candy store.
Again, expecting to be ushered away, I was pleasantly surprised when an amiable gentleman welcomed me in and offered to give me a tour of facility. I later learned that this was Darren Peters, the owner of Tactical Machining. He gave me a tour of each station, kindly allowing pictures of each step. I met several of the people working there, and it was amazing to witness the skill and workmanship delivered on their products; they are clearly proud of what they make, and for good reason.
My first thought as I viewed their line of billet AR15 components was to shove my hand into my wallet pocket and yell “Shut up and take my money!” Unfortunately, they have not yet released that particular product, though Mr. Peters did inform me that they should be hitting the market sometime in 2013. I would love to have just left with “one of everything”, but I restrained myself. I did purchase a few things, and plan to return again one day soon to make some more additions to my collection as I really need one of their billet 308 uppers to complete a build.
In my days I’ve visited more gunshops, AR15 armorers, AR builders, et cetera, than I can count; nothing against them, but these guys at TM are the REAL DEAL. They don’t just take pre-made lower/uppers and assemble them, they MAKE the parts. And then assemble them. Based on the volume of product they are outputting, I can only assume that many other local companies actually use them as an OEM to build their parts. Tactical Machining also offers quite an impressive line of 80% lowers and jigs, for those “do-it-yourself” guys, and they are rumored to be working on sponsoring a “build party” model for the newbie builders to attend and build with the help of a seasoned builder. Again – “Shut up and take my money!”
I’m blessed to live in Central Florida’s active AR15-producing world. I can drive an hour in any direction and be at any one of 7-plus AR producers, but Tactical Machining of Deland, Fl is best kept secret in the business. Darren is a great guy to work with, as well as being a (relatively) new Ham Radio guy, and a pilot. Most importantly of all, he has a love for firearms, which should drive his company straight and true.
